Repairing Storm-Related Roof Damage

By | Uncategorized | No Comments

Repairing Storm-Related Roof Damage

 

Following a storm, you will need to check to see if your home has been damaged in any way. In particular, you will need to check your roof. A natural disaster does not have to be a particularly nasty storm to cause damage to your home.

One of the areas of the home that is particularly susceptible to damage from bad storms is the roof. Roofing material can be ripped up and dislodged by strong storms. When this happens, the rain can then penetrate the ceiling and cause water damage. If this is not taken care of as soon as possible, the repairs will be much more extensive, and they will cost you a lot more.

You will need to climb up on the roof and carefully check it from one side to the other. From the ground, you cannot get a good vantage point, and you will not be able to see the full extent of the damage unless it is very extensive.

One missed spot can result in extensive damage if it is not caught and fixed. If another severe storm hits, you may not only have to replace certain parts of your roof but portions of the wall, furniture, and other household items.

Directly following the storm, you will probably not be able to complete all of the repairs that are needed right away. Unless you are a professional carpenter, engineer, or roofer, you probably do not have the materials you need to complete the repair job.

As a result, you will have to do something to repair it temporarily. This is important because it can still prevent a lot of the damage that may otherwise occur before a professional roofer can help or before you can get the materials that you need to do it yourself.

8-23 roof damage

Tips for Tackling Storm-Related Roof Damage

 

To begin, you will want to make sure that you have a tarp or waterproof canvas in storage so that you can cover areas that have received damage and which will leak before you can repair it. The tarp should be spread over the top of the roof so that damage will not be sustained in the wood under the shingles.

If you only put buckets under the leaks, you will be gathering the water after it has performed damage that will add to your repair expenses. You will want carefully to apply the waterproof canvas or the tarp so that you do not cause more damage than is already present.

Make sure that you have someone outside with you while you are on the roof. It is also a good idea to get others to help you apply the tarps appropriately so that the task will go faster. You will want to place heavy weights on the edges of the tarp so that the wind does not remove it.

It is a good idea to make sure that even heavy storm winds will not remove these things as the roof will be the most susceptible to damage during the storms and rain. An alternative to a tarp or waterproof canvas is using a roof sealant in the areas that are exposed to the weather.

Of course, you should make sure that you use the appropriate safety equipment when you are up on the roof. You should make sure that you have a hard hat so that if you hit your head, you will not suffer from a concussion or worse.

It is also important to have and use safety ladders and rope supports in appropriate areas to prevent a fall. The more precautions you can take to prevent an accident, the better.

After you have completed as many temporary repairs as possible, you will want to pursue the completion of permanent repairs actively. Call a professional roofing contractor, like Ardent Roof Systems, to find out how soon you can make an appointment.

If many others have experienced the same kind of damage, then it may be weeks or even months until you will be able to fix the problems permanently. By properly taking care of your home following a storm, it will last much longer in nice condition.

 

Ardent Roof Systems inc.
9765 45 Ave NW
Edmonton, Alberta
T6E 5V8
(780) 488-4900
http://www.ardentroofsystems.com/

Foam Insulation Sales Shoot Up Among Increased Home Improvement Projects

By | Uncategorized | No Comments

Foam Insulation Sales Shoot Up Among Increased Home Improvement Projects

 

There is no doubt that the use of spray polyurethane foam (SPF) has increased over the years in North America and more so in Canada. This widespread use is growing thanks to the many home improvement projects that homeowners are undertaking. Many have found the benefits of SPF very helpful, resulting in more use. Data by the American Chemistry Council (ACC) reveals that Canada has greatly embraced the use of SPF as the use is growing ever so high. The figures are more than a decade in the making and below is a look at some of the to applications for SPF in the Canadian market. In addition, this article delves into the merits that have been brought by foam insulation.

Where is spray polyurethane foam (SPF) being used?

The use of SPF is very common in unvented attics. HVAC equipment can be placed in the attic for optimal efficiency. For this reason, many home improvement projects are using SPF. According to the Canadian Urethane Foam Contractors Association, SPF can reduce heating and air condition size. The HVAC sizing can be up to 35%, and this will not affect efficiency and comfort. Unvented attics are some of the main drivers of SPF use in the industry. This application is saving many people a lot of money in the process.

8-17 Ardent Roof

Some home improvement projects have seen the use of SPF for roofing as well. In addition to superior insulation and lowered cost, using this material for roofing comes with many other merits. However, it is worth noting that SPF as a roofing agent is only starting to get recognition as more homeowners discover the merits therein. Below is a look at more reasons why SPF sales are growing when it comes to home improvement projects.

SPF is an excellent agent for reducing drafts and noise in the home. As an effective air barrier, it will prevent draft from doors, windows and floors; for a more comfortable home interior. Because it is able to seal even the smallest gaps, people can look forward to eradicating the entry of insects and pests in the home. This goes a long way in boosting a healthy environment for your family. Stability is another factor that stands out when it comes to SPF. Structural decomposition does not happen, ensuring a firmer surface in the home. Homeowners see this insulation material lasting even longer, to their delight.

SPF mainly comes in two formats which are open-cell and closed-cell foams. The closed-cell is sturdier and rigid, and it works very well when used on the pitched part of the roof. Both formats can be applied in all home improvement projects accordingly. Both formats are being used more and more in the industry. More than 90 million pounds of SPF have been used for roofing and insulation in Canada. Statistics from the Spray Foam Coalition (SFC) and Centre for the Polyurethanes Industry (CPI) continue to show that SPF consumption will continue on an upward trend in Canada. If this data is anything to go by, spray foam insulation sales might go even higher.

 

Ardent Roof Systems inc.
9765 45 Ave NW
Edmonton, Alberta
T6E 5V8
(780) 488-4900
http://www.ardentroofsystems.com/

Do You Have Soffit on Your Roof?

By | Uncategorized | No Comments

Do You Have Soffit on Your Roof?

Soffits are one of those pieces of the house that are rarely seen or noticed. However, they serve a very important function. They protect crucial features of that a house cannot do without in most cases. Soffit refers to those bottoms of the eave where a house roof extends over the sidewalls of the house. There are various types of soffit both in design and material. It is therefore important to know the differences if you are building or designing a house. Most people cannot tell whether they have soffit or not.

Benefits of soffit

Soffit is used to connect the roof overhang and the side of the house. It protects the support beams making up the structure of the house roof from various elements, and also restricts the amounts of dampness entering the house. In addition, it is used for aesthetic purpose, adding a touch of elegance around the perimeter of the house’s roof.

8-9 Roofing

Types of soffit

There are many different types of soffits just as there are numerous building styles. Here are some of the main types of soffit. Soffit can be classified according to the materials used to make them. Soffit materials might be metal, wood, vinyl, or fiberboard. However, the most common materials used are wood, aluminum and vinyl.

  1. Wood is beautiful and less expensive compared to other materials. There are various types of wood you can choose, but you need to know the benefits and shortcomings before installing. Pros – less expensive, looks natural, and adds tremendous warmth. Cons – be prepared to replace the soffit over time.
  2.  Vinyl is the other type of material that is mainly used. In fact, you can reface your wood soffit with vinyl panels that match the theme of the house. The vinyl attaches itself directly over the existing wood. However, it does not significantly add to the cost of the project. Pros – affordable, available in different textures, water resistant and easy to clean. Cons – affected by heat, and some people feel it is a cheaper looking product.
  3. Aluminum is good because it does not rot or decay like wood. It is waterproof and looks amazing. If you hire an experienced installer, he can bend the aluminum to wrap the existing fascia. Once installed, it will look good for decades. Most homeowners prefer aluminum over vinyl because it captures the fascia very well. Pros – easy to clean, durable, and water resistant. Cons – expensive, can dent if forced is applied, and does not insulate as well as vinyl.

Other materials used

People who go for soffit in materials other than wood, aluminum or vinyl make their decisions based on various reasons. Steel is much more durable than other alternatives, including aluminum. Some people also prefer steel soffit because it comes in a variety of colors. However, steel will run about 25-35% higher in cost than the famous aluminum, but can be a great option for your soffit.

Fiber cement is also used, but it is less common and among the expensive options in soffit, but there are people who prefer it. Normally, most soffit is made of wood. However, with different new materials, soffit is now available in numerous modern designs.

Ardent Roof Systems inc.
9765 45 Ave NW
Edmonton, Alberta
T6E 5V8
(780) 488-4900
http://www.ardentroofsystems.com/

3 Main Reasons to Plan Gutter Cleaning This Summer

By | Uncategorized | No Comments

3 Main Reasons to Plan Gutter Cleaning This Summer

 

Summertime is a great time to have your gutter system cleaned. Unluckily, most gutters tend to be overlooked and neglected because people do not think about them regularly. The main problem is that we normally wait to clean the gutters when a problem arises.

Gutters are unseen and very warm during summer months. However, they work without any input or acknowledgement for property owners. In fact, most people can say they are the things that go unnoticed because they do their job very well. But the crucial role they play to the life of the house should increase the homeowner’s awareness, and highlight the need to schedule gutter cleaning this summer.

Summer is here, and it has brought a lot of things with it. So, if you have been ignoring your gutters, it is time to think again and set some time for gutter cleaning now. Below are reasons that will make you want to clean your gutters immediately.

  1. Saves you costly house repairs

 

Blocked gutters can damage your house. When they are blocked, they cannot perform their work properly. They cannot drain water properly from your house as they should. This means you may be risking major damages to your roofing, fascia, soffit or even the foundation of your house. The damages can be very expensive to repair. They can even lead to other problems such as interior flooding or mold.

8-3 Ardent

  1. Cleaning your gutters extends their life expectancy

 

Keeping the gutters clean can help to extend their expectancy. If they are not cleaned, they can rust, crack or even break. You need to give them the attention they deserve. Otherwise, you will be forced to replace most of them, and this means you will need to spend more money. With regular cleaning, all your gutters will live a longer life.

 

  1. Clean gutters help to keep and maintain the value and beauty of your house

 

Cleaning the gutters will not only unblock them but also help to maintain the value and beauty of your home. Flooding due to useless gutters can mess up your lawn, clean away your hedges, or eat away at lawn ornaments. Gutter cleaning and maintenance ensures that your house is safe and kept beautiful. You can also hire the professionals at Ardent Roof Systems to do the work for you to keep your home in tiptop shape.

 

Ardent Roof Systems inc.

9765 45 Ave NW
Edmonton, Alberta
T6E 5V8

(780) 488-4900

http://www.ardentroofsystems.com/

Some Important Tips To Keep Your Roof In Tiptop Shape

By | Uncategorized | No Comments

Some Important Tips To Keep Your Roof In Tiptop Shape

For homeowners, the phrase a stitch in time saves nine is a practical one because failure to sort out minor issues such as cracks on the wall lead to huge responsibilities like the need of a new wall. This goes for the roof too. You are not comfortable until the roof over your head is in a good condition.

Roof maintenance is a simple process that involves taking control of situations before they build up to worse outcomes. It requires application of simple knowledge and no zero-sum thinking in any way. Zero sum thinking is an ingredient for disaster. Thinking that you can cut on costs and avoid spending and still end up with a good roof is wrong; get good resources, materials from suppliers and competent contractors to work on your roof during constructions so as to have a strong roof.

 

7-26 roofing contractor

A good roof:

  • Ensures the safety of you and your family
  • Keeps the inside of your house dry
  • Deters theft

In addition to setting up a stronger roof, here are some tips to follow so as to ensure your roof is in perfect shape always:

  1. Call in a roofer in case of leaks to fix it immediately. Always ensure that you choose the best roofer who will completely sort out the issue. Consider recommendations from your neighbors and friends when looking for the roofer.
  2. Choose roofing materials wisely. Go with the ones that are suitable for the climatic conditions of your area. Certain materials, e.g. clay, do well only in cool dry conditions.
  3. Get ice off the roof during winter. Ice build-up leads to leakages and warping. This occurs when the snow melts and enters the interior lining of the roofs and then freezes in there for a long time, corroding materials slowly.
  4. Verify the contractor’s past jobs before hiring them. Review their past work. Visit the homes they worked on.
  5. When you climb onto the roof make sure you have the appropriate footwear on. A rubber-soled boot is the best. It applies less pressure on the roof and therefore chances of damage are minimal. Avoid stepping on any weak spots. You can step where the nails went through, as this is slightly stronger and may not cave in easily. Additionally, the rubbers have a better grip, which means you are safer.
  6. Install gutters and maintain them properly so as to funnel rainwater off the roof. If water is left on the roof, it can cause leaks. That is why it is also essential to ensure the gutter is not clogged. Gutters are very important, and building officials in Canada are recognizing it. Municipalities across the country have made this a necessary requirement on all new residential being constructed.
  7. Secure loose shingles well. You can use the plastic roofing cement; carefully apply it under the shingle.

7-26 shingles

In addition to the above DIY techniques, it is important to ensure you have a functional warranty and make best use of it. Call in contractors to fix problems before they worsen.

Lastly, the following safety measures are important:

  • Never repair your roof during rains. The roof becomes slippery and may result in accidents. Leave it until it dries up.
  • Check if your contractor’s workmen have insurance so that in case of accidents they are taken care of.

The bottom line, taking control of situations and maintaining them properly help prevent damages and unnecessary repair costs. Take the initiative.

Ardent Roof Systems inc.

9765 45 Ave NW
Edmonton, Alberta
T6E 5V8

(780) 488-4900

http://www.ardentroofsystems.com/

Game Changing Advances in Asphalt Roofing Technology

By | Uncategorized | No Comments

Game Changing Advances in Asphalt Roofing Technology

When we think about advances in technology, we don’t often think of the significant advances in asphalt roofing technology. However, asphalt roofing has gone through many years of significant technological advances, modifications, and additions. Ever since its inception in 1893, there have been extraordinary advances, and the recent technology is worth taking a look at. Asphalt roofing has evolved to become energy efficient, durable, and sustainable. In this article, we focus on the best advancements in asphalt roofing.

Fiberglass Reinforcement Material

Throughout the century of asphalt roofing, cotton rags that included wood pulp and paper were used as the reinforcement material. With modern advancements in design and technology, fiberglass is now being used as the reinforcement material. Fiberglass asphalt roofs are thinner, lighter, and come with a higher fire safety rating. Fiberglass also absorbs less moisture, curls effectively, and is heat resistant which makes it an excellent choice for warm climates. These improvements mean that asphalt roofing now has a longer lifespan and comes with an extended warranty.

UV Protection

UV radiation causes skin damage, certain types of cataracts, and many other skin issues. This makes it crucial to protect you and your family from the harmful UV exposure. Through the deep commitment to customer safety and satisfaction, asphalt roofing technology has moved to safeguard the needs of the homeowner. The modern asphalt roofs are designed to protect the surface from UV light and other chemical damage. The 100% UV protection guarantees maximum functionality and safety.

7-19 asphalt

Added Layers

Asphalt shingles improved from having single layers to now having two or more tabs. This has brought about a great improvement in performance and asphalt roofing can be relied on to deliver longevity. The multi-layered shingles are heavier, more affordable and add a unique touch and visual appeal to your home. As long as your home can handle the additional weight, the extra layers will offer lots of protection and beauty to your home.

Discoloration

Asphalt shingles are known to provide homes with a more stunning and customized appearance due to the many colors they come in. Asphalt roofing comes in different color choices, and can range from pale gray, red, shades of green, and many other colors. However, due to conditions, asphalt shingles were known to lose their color during the past years. With new technology and addition of special pigments, asphalt shingles no longer lose their color. When correctly installed, you will enjoy the brilliant color options for many years.

Wind Resistance

No roof covering offers better protection from the wind than the modern asphalt roofing technology. Between 1990 and 2000, great improvements were made. The asphalt sealant is now being placed closer to the edges. This is because the edges are more susceptible to roof damage making it crucial to secure the framing. With these advances, there will be fewer bad reports after a night of severe winds.

Laminating Adhesives

During the past years, the oxidized sealant slid away when not properly tied. There have now been changes from the oxidized sealant to a polymer modified version. This is great relief especially to the homeowners in warmer climates.

As asphalt roofing technology continues to advance, you can count on a professional roofing contractor to give your home the best asphalt roofing. Get in touch with Ardent Roof Systems to discuss your needs today!

 

Ardent Roof Systems inc.

9765 45 Ave NW
Edmonton, Alberta
T6E 5V8

(780) 488-4900

http://www.ardentroofsystems.com/

The Best Roofing Materials for Canadian Homes

By | Uncategorized | No Comments

The Best Roofing Materials for Canadian Homes

 

When it comes to choosing roofing materials, the options are so vast and so various in pricing that it can confuse buyers. The low price of asphalt often makes it the natural, uncontested choice for many sloping roofs. But did you know that whereas asphalt shingles are very popular as water shedding roofs in Canada’s wetter regions (like British Columbia), slate and clay tiles last much, much longer?

If you’re living in Western Canada, there is far more skilled slate roofing workers than there are in other parts of the country. Slate is very expensive, but its lifespan is measured in centuries. If your home is a masonry or brick home, which can support the extra weight, slate roofing is the best investment you can make for your family and future generations.

Clay tiles are the next best thing to slate in terms of lifespan. In the right climate, clay tiles can last 250 years. Clay is one of the oldest roofing systems. However, it is best suited for dry, hot climates since the freezing and thawing cycle can impact the lifespan. It’s not the best for Canadian homes, but if you do use it in a region like British Columbia where thermal cycling is frequent, you should choose frost-resistant Grade 1 quality.

When it comes to metal tiles, copper roofing is far superior to any other metal. It can be rated as many as 150 years. You will find that expensive homes with luxury roofs have copper tiles or sheeting, which says a lot about the price. But it comes with a lifetime warranty and takes on a beautiful pale green patina over time.

7-11 Roof

Asphalt can either be fiberglass or have a hydrocarbon composition covered in crushed stone. The problem with asphalt, which is so widely used, is that it is not very resistant to the sun. Inadequate ventilation in the attics can cause overheating and further reduce its usual lifespan (warranty period) of 20 to 25 years. On the flip side, it is easy to install and maintain. If you do use asphalt, make sure that the attics have enough vents to circulate air and keep temperatures tolerable.

Cedar shingles in various shapes and with a variety of aged finishes lend an old world charm that many Canadian homeowners are looking for. It is natural, bug-resistant and common in warmer climate zones. Only Extra-A Grade should be used for roofing, which is typically rated 30 years. But cedar is expensive to install, needs regular maintenance and is not fireproof.

Fiberglass shingles on the other hand, imitate cedar shingles, and last longer (about 50 years). This material is made of clay, fiberglass and resin, making it damp-resistant. It also needs no maintenance.

Metal tiles such as stainless or galvanized steel sheeting are the most common among metal roofing, though aluminum, galvalume and titanium sheeting is also available. It is recommended that metal roofing be installed by specialists, in which case it would come with a guarantee of 50 years. The metal itself can last 100 years or more and can be very versatile in appearance.

Flat roofs have their own (limited) options for coverings. These include asphalt covering, elastomeric membrane and thermoplastic olefin membrane. Asphalt covering is the least expensive but comes with 10-year warranty. The other membranes can last 40 to 50 years. A professional local roofing contractor will be best able to help you make a decision on the best roofing material for your home’s flat or sloping roof.

 

Ardent Roof Systems inc.

9765 45 Ave NW
Edmonton, Alberta
T6E 5V8

(780) 488-4900

http://www.ardentroofsystems.com/

Why Ventilation in Your Attic is So Important in the Summer

By | Uncategorized | No Comments

Why Ventilation in Your Attic is So Important in the Summer

If you recall, one of the very first things you will learn in your science class is that heat rises. However, your home is very different. If you do not have the most appropriate insulation and ability for your attic to ventilate, the heat will migrate. To provide an example, when the sun hits your roof, this heats up your attic. Then your attic will have hot air expand in the area and it will push the air down into your home. As a result, the temperature will increase in the house and will struggle to cool down at night. Looking at this moving forward, it will take more days for the home to cool down if it is continuous sunny out.

Unfortunately, homeowners will then turn up the air conditioning and/or fans. This will cause our systems to run at full capacity, and it can add up when we look at our electric bills and typical maintenance on the systems.

Meanwhile, any water in the attic will cause condensation to collect due to warmer air having extra moisture. This extra condensation and heat can potentially cause more damage to that roof and your roofing materials. They can also be a breeding ground for mildew and mold to build up in your house. If you add it all up, this could provide you with some expensive repair bills.

However, there is good news. If you have an attic that is well ventilated, you can assist in decreasing the possibility of any damage to this area. Although it is not as easy as putting in a few vents, you can contact your professional and locally owned roofing company, Ardent Roof Systems, to assist with this process.

7-4 attic

The end goal of ventilation is to have a good flow of cooler air from the outside go through your attic and then out the exhaust. This will carry all of the moister air in your attic with it. If it is not balanced, there can be hotter spots that form and it won’t help balance out all of the good things you’re doing for the new ventilation system. To explain it in a different way, think about when you open your windows to allow cool air in. When you open too many windows, it doesn’t allow you to feel the full benefit of the cooler air outside. If you shut every window but one, you still won’t feel it. However, if you open only two windows on the opposite ends of the home, this air has an entryway and an exit way. You will slowly feel your home getting cooler. This works exactly the same way for your attic’s ventilation system.

 

Ardent Roof Systems inc.
9765 45 Ave NW
Edmonton, Alberta
T6E 5V8

(780) 488-4900

http://www.ardentroofsystems.com/

9 Things You Should Know Before Installing a Skylight

By | Uncategorized | No Comments

9 Things You Should Know Before Installing a Skylight

Ensuring that you pick the right skylight for your home is among the most important aspects about daylighting. Pick correctly and you can be assured that you will see that all daylighting benefits are significantly greater.

Many homeowners make a mistake of installing daylighting systems that simply do not match their needs. This results in productivity and energy usage that is not as great as it could have been. In this article, we take a look at the 9 factors you need to consider before you install a skylight in your home. Continue reading to learn more.

 

1. Don’t Compromise on Quality

Important considerations when it comes to a skylight include things like sound reduction, water tightness, and energy efficiency, among other factors. There is a need to explore additional options like UV coatings, ventilation and shading. Additionally, most manufacturers today offer high-end products that are made using sustainable materials so as to protect our environment. Skylight installation is quite a serious undertaking, which is why you need to ensure that you will be happy with your decision for a very long time.

 

2. Choose the Right Placement

What determines skylight placement is your home’s rafter placement. Ensure that you plan well and have a blueprint or space plane handy prior to starting to cut out the roof’s sections.

6-28 Skylight

3. Beware of Bad Weather

Bad weather and rain can seriously derail your project and sometimes even make it difficult to continue if moisture gets in halfway through the installation process.

 

4. There is a Real Danger of Falling, So Watch Out

Make sure that you are using the ladder of the correct height and type, and that you have put on footwear with the right traction. You may need to use roof jacks for supporting a 2” by 12” board to provide support while you work. If you do so, make sure to secure roof jacks with nails and also ensure that all nails are properly driven into the roof joists rather than only through the sheathing.

 

5. Know the Slope Before Buying Flashing

Many flashing kits are available, which cater to specific types of pitches. Make sure you have the right kind of information so as to make the best decision.

 

6. Begin From the Inside

After removing the interior sheathing, have four nails or screws driven into the corners of the box outline that you have marked for the skylight. This way it will be easier for you to locate the opening of the skylight from the roof.

6-28 Skylight3

7. Remove the Shingles Prior to Starting

Have the full sheet of shingles removed from your roof until such a time that the marked opening is exposed.

 

8. Waterproof the Flashing

The waterproof flashing joins the flashing that comes with the kit and is a great way of diverting ice and water flow from your opening.

 

9. Take Time to Add Extra Insulation and Dry Wall

Be ready to apply some insulation and dry wall to reduce condensation and to ensure that the light you allow does not expose less than perfect ceiling space.

 

Skylight installation is a large undertaking. For this reason, you need to be sure that what you are installing today will serve the intended purposes for a long time to come. The above are factors to consider before you install a skylight.

 

Ardent Roof Systems inc.
9765 45 Ave NW
Edmonton, Alberta
T6E 5V8

(780) 488-4900

http://www.ardentroofsystems.com/

Want A Metal Roof? Have One Already? Here Are The Pros And Cons

By | Roofing | No Comments

Want A Metal Roof? Have One Already? Here Are The Pros And Cons

Whether it’s an overhaul or putting a new roof on your house, there are quite a number of options to pick from. Your choice should not only be informed by style and what color you like because in the long run every kind of roof type has its own problems that will arise and you should be ready to deal with them. In this piece, we shall focus on metal roofing. Metal roofs can be a good choice that combines safety with style and function. Below are the pros and cons of metal roofing that will help to inform your decision.

Pros

Not as heavy as you may think

As much as metal roofs are famed for being strong and durable, they are surprisingly lighter than other types of roofing like concrete and tile. The fact that they are not heavy means they are easy to work with and can even be installed over another roof without causing any damage to the house.

Durable

The life span of a metal roof is way longer than any other type. While using traditional asphalt will give you about 12-20 years of service, metal roofs can last 40 to 70 years; an unbeatable bargain. With a metal roof, the roofing can last as long as the house itself with no repairs.

6-20 metal roof (2)

Resistant to fire

The panels used in metal roofing are incombustible which adds to their durability. Their fireproof nature also means that you don’t have to worry about the roof setting the house on fire when lightning strikes or wildfires occur.

Cons

They don’t come cheap

Metal roofing is not the cheapest to have for your home. A roof of this kind may cost up to double or triple the cost of other roofing options. The only way this would make for sensible expenditure is if you planned to stick around in your home long enough to enjoy the benefits of spending so much.

Denting

Just like cars dent, so do metal roofs. A heavy hailstorm is one of the reasons such indentation may occur. However, it is nothing that a few repairs can’t fix; then again, there are people who would prefer not to have to deal with it.

They are noisy

It’s going to be a problem every time it rains and it gets worse when it’s a hailstorm. It may be described as romantic in love stories and poems, but there is nothing romantic about ceaseless noise when your favorite show is on. This can of course be dealt with by doing a little insulation work while installing the roof but this just shoots up an already high price.

Temperature fluctuations

Metal is a good conductor of heat and, therefore, it changes as the weather changes contracting on cold days and expanding on hot ones. Installing fasteners, which allow the roof some breathing space, can solve this but if this is not done the panels can loosen.

At the end of the day you alone can make the choice on what kind of roofing you want. Whether you are driven by aesthetics or long-term benefits, whatever you choose should be what you really want.

Ardent Roof Systems Inc.

9765 45 Ave NW

Edmonton, AB T6E 5V8

(780) 488-4900

http://www.ardentroofsystems.com/